How To Load Documents - Panasonic UF-6300 Operating Instructions Manual

How to Load Documents

1. Be sure the document(s) is free of staples, paper clips and is not torn, greasy or covered by foreign objects.
2. Place the document(s) FACE DOWN on the Automatic Document Feeder (ADF) until the leading edge
inserted in the machine stops.
You can also stack up to 30 PAGES on the ADF at one time. If you are sending more than 30 pages of the
document(s) (up to 50 pages), make sure that the bottom sheet of the document(s) enters first.
3. Adjust the Document Guides to center the document on the ADF.
CORRECT
When you set a document on the ADF, the display message will change from date and time (Standby) to
the following message. You can now change basic transmission settings or begin the dialling procedure.
ENTER STATION(S)
THEN PRESS START 00%
1. The document limitation to send multiple pages is as follows.
NOTE
Up to 20 pages
Up to 30 pages*
* Please note that although the size and thickness meets the specifications, you might not be
able to set 30 pages with some types of paper. If you are sending more than 30 pages (Up to
50 pages), limitation of document size and thickness is A4 and 0.06 mm to 0.10 mm.
2. If you send more than 50 pages, it is recommended to use the Job Build function.
(See page 40)
3. Transmitting documents longer than 356 mm requires user's assistance.
4. When transmitting documents longer than A4, please extend the document sub tray.
INCORRECT
Document Size
Up to 257mm X 364mm
A4 size
Document Sub Tray
Loading Documents
Document Guides
Document Thickness
0.06 mm to 0.12 mm
0.06 mm to 0.10 mm
43