Connections - Panasonic SC-AP01 Operating Instructions Manual

Connections

Connect the AC adaptor to the household AC
mains socket.
AC adaptor
(supplied)
AC mains lead
(supplied)
To a household AC mains socket
[For\the\United\Kingdom\and\Ireland]
BE SURE TO READ THE CAUTION
FOR THE AC MAINS LEAD ON PAGE
2 BEFORE CONNECTION.
≥ Do not use any other AC adaptors except the supplied
one.
≥ The unit is in the standby condition when the AC adaptor
is connected. The primary circuit is always "live" as long
as the AC adaptor is connected to an electrical outlet.
≥ These speakers do not have magnetic shielding. Do not
place them near a television, personal computer or other
devices easily influenced by magnetism.
≥ When moving this unit, be sure to remove the USB cable
and turn this unit to standby mode.
*1: The USB cable is not supplied with this unit. Use the USB cable that is supplied with the compatible device. If a USB
cable is not supplied with the device, be sure to use an appropriate USB cable.
Refer to the operating instructions of the device for details about the appropriate USB cable.
(DC IN 12 V)
This system consumes a
small amount of AC
power ( 14) even when
turned off.
≥ When leaving the product
unused for a long time,
turn off the unit and pull
the AC mains lead out of
the household AC mains
socket for power saving.
Charging from the USB port
When this unit is turned on and a portable music
player that is compatible to USB charging is
connected to this unit's USB port, charging will start
automatically.
≥ It is not possible to play back the music on the
connected device from this unit's speakers or
operate the device from this unit through this
connection.
≥ Even if the charge is not complete, charging will
stop and this unit will turn to standby mode if the
automatic standby is activated.
Set "AUTO OFF" to "OFF" for continuous
charging. ( 11)
≥ Refer to the operating instructions of the device
for details about charging.
Preparation
Turn this unit on.
1
Connect the compatible device to this unit
with an appropriate USB cable.
USB cable*
(DC OUT 5 V, 2.1 A MAX)
≥ Refer to the connected device to check if the
device is fully charged.
2
Once fully charged, remove the USB
cable from this unit.
≥ There is no charging during standby mode.
≥ This unit is capable of charging up to a load of 2.1 A.
≥ When fully charged, this unit will not stop the charging
automatically. Remove the USB cable from this unit once
the connected device is fully charged.
To the
compatible
device
1
5
RQT9658