Operation; Setting Present Time; Setting No. Of Programmed Time - Panasonic CZ-01ESW11P Operation Manual

OPERATION

SETTING PRESENT TIME

(Fig. 3)
(Example) In case of setting Friday, 5:30 p.m.
1
Press the CLOCK ADJUSTING
BUTTON. The present time display
flashes.
Note) ● The present time needs adjusting in case
of turning power supply on for the first
time or the occurrence of power failure
over the period of 48 hours or more.
1
MON
CLOCK
2
Press the BUTTON FOR SE-
LECTING DAYS OF A WEEK. Each
time the button is pressed, the day
display shifts to the right.
Note) ● The display "MON" follows the display
"SUN."
5
FRI
AM
CLOCK
3
Set the time with the HOUR/
MINUTE BUTTON. Each time the
HOUR/MINUTE BUTTON is pressed,
the display is put forward minute by
minute and hour by hour. When the
button is kept pressed, the display
is put forward continuously.
Notes) ● After becoming "AM 11:00", when the
button is pressed, the display becomes
"PM 0:00".
● After becoming "59" (minute), when the
button is pressed, the display becomes
"00" (minute).
11
AM
Set the day to
Friday.
5
FRI
CLOCK
PM
4
Press the TIMER ON BUTTON
the moment the time signal of TV,
radio, telephone, etc. is heard. The
mark " : " flashes, and the clock
starts.
5
FRI
CLOCK
PM
Notes)
● The clock used is of 12-hour type.
● When you turn power supply on, the system may
display " " for about one minute and not start to
operate after all the liquid crystal displays appear at
a time.
● If the CLOCK ADJUSTING BUTTON is pressed by
mistake, press it again to return to the original state.
As the clock does not stop, the time indicated by the
clock is kept correct. In case of power failure within
48 hours, the clock keeps operating by utilizing the
built-in battery.
SETTING NO. OF
PROGRAMMED TIME
(Fig. 4)
(Example) Time No. 5 (to be programmed only
when used in conjunction with the
central remote controller)
Monday to Friday:
Operating from 8:45 a.m. till 5:00
p.m.
Operating from 5:15 p.m. till 11:00
p.m.
Saturday and Sunday:
Setting the whole day stop opera-
tion (application for holidays)
controlled by programmed time.
Set the time to
5:30 p.m.
Press the TIMER
ON BUTTON in
tune with the time
signal at 5:30 p.m.