Stand Installation - LG PLASMA TV Owner's Manual

STAND INSTALLATION

(Only 50PK7 *** , 50PK9 *** )
■ Image shown may differ from your TV.
When assembling the desk type stand, check whether the bolt is fully tightened. (If not tightened fully,
the product can tilt forward after the product installation.) If you tighten the bolt with excessive force,
the bolt can deviate from abrasion of the tightening part of the bolt.
1
Carefully place the TV screen side down on
a cushioned surface to protect the screen
from damage.
2
Set the Stand Base on even floor.
Assemble the parts of the Stand Body
with the Stand Base of the TV.
M4x14
3
Assemble the parts of the Cable
Management Clip with the Stand Body.
Cable
Management
Clip
4
5
Stand Body
Stand Base
Stand Body
Assemble the TV as shown.
Fix the 4 bolts securely using the holes in
the back of the TV.
M4x28
7