Panasonic Viera TX-P42GT50Y Operating Instructions Manual page 55

Update DVB channel automatically [Update Channel List]
You can add new channels, delete removed channels, update channel name and position automatically to the channel
list.
DVB-T Update Channel List
Progress
CH 5
This will take about 3 minutes.
CH Channel Name
● To update DVB-S channels, set [Satellite], [Search Mode] and [Scan Mode] before updating.
DVB-S Update Channel List Settings
Satellite Astra 19.2° E
Search Mode Free Channels
Scan Mode Quick
Start scan
Display a notification message [New Channel Message] (DVB)
Selects whether to give a notification message when a new DVB channel is found.
New channels found!
Press OK to update channel list.
Press EXIT to ignore.
Check DVB signal [Signal Condition]
Selects a channel and checks the DVB signal condition.
A good Signal Strength is not an indication of suitable signal for DVB reception.
Use the Signal Quality indicator as follows.
●
Green bar: Good
● Yellow bar: Poor
●
Red bar: Bad (Check the Terrestrial aerial, cable or Satellite dish)
Example:
DVB-C Signal Condition
Channel Name 70 CBBC Channel
Signal Quality
Signal Strength
Bit Error Rate 0.00E+00
Network Name
Wenvoe
Parameter 802,00 MHz, 64 QAM, 6940 kS/s
●
The channel list is updated while keeping your settings in [Favourites Edit],
69 [Channel List], [Child Lock], etc.
●
Depending on the signal condition, the update may not work properly.
Type Quality
select
access / store
●
After settings, select [Start scan].
●
Selecting OK will perform [Update Channel List].
These bars show the maximum signal value of the selected
90 9 %
80 8 %
channel.
●
To change the channel
55