Kenwood DDX6054 Instruction Manual page 93

FM tuner section
Frequency Range (50 kHz)
: 87.5 MHz – 108.0 MHz
Usable Sensitivity (S/N : 26 dB)
DNX7240BT: 0.8 μV/ 75 Ω
DDX6054: 0.7 μV/ 75 Ω
Quieting Sensitivity (S/N : 46 dB)
: 1.6 μV/ 75 Ω
Frequency Response (± 3.0 dB)
: 30 Hz – 15 kHz
S/N Ratio (dB)
: 65 dB (MONO)
Selectivity (± 400 kHz)
: ≥ 80 dB
Stereo Separation
: 35 dB (1 kHz)
LW tuner section
Frequency Range (9 kHz)
: 153 kHz – 281 kHz
Usable Sensitivity
: 45 μV
MW tuner section
Frequency Range (9 kHz)
: 531 kHz – 1611 kHz
Usable Sensitivity
: 25 μV
Video section
Color System of External Video Input
: NTSC, PAL
External Video Input Level (mini jack)
: 1 Vp-p/ 75 Ω
External Audio Max Input Level (mini jack)
: 2 V/ 25 kΩ
Video Output Level (RCA jacks)
: 1 Vp-p/ 75 Ω
Audio Output Level (RCA jacks)
: 1.2 V/ 10 kΩ
Analog RGB input (DDX6054 only)
: 0.7 Vp-p/ 75 Ω
Audio section
Maximum Power (Front & Rear)
: 50 W x 4
Full Bandwidth Power (Front & Rear)
(PWR DIN 45324, +B=14.4V)
: 30 W x 4
Preout Level (V)
: 2 V/ 10 kΩ
Preout Impedance
: ≤ 600 Ω
Speaker Impedance
: 4 – 8 Ω
Tone action (DDX6054 only)
Bass : 100 Hz ± 10 dB
Middle : 1 kHz ± 10 dB
Treble : 10 kHz ± 10 dB
DSP Section (DNX7240BT only)
Graphics equalizer
Band: 5 Band
Frequency (BAND1 – 5): 62.5/ 250/ 1k/ 4k/ 16k Hz
Gain
: -9/ -8/ -7/ -6/ -5/ -4/ -3/ -2/ -1/ 0/ 1/ 2/ 3/ 4/ 5/
6/ 7/ 8/ 9 dB
X'over
High pass filter
Frequency: Through, 30/ 40/ 50/ 60/ 70/ 80/ 90/
100/ 120/ 150/ 180/ 220/ 250 Hz
Slope: -6/ -12/ -18/ -24 dB/Oct.
Low pass filter
Frequency: 30/ 40/ 50/ 60/ 70/ 80/ 90/ 100/ 120/
150/ 180/ 220/ 250 Hz, Through
Slope: -6/ -12/ -18/ -24 dB/Oct.
Time alignment
: 0 – 440 cm (2 cm Step)
Position
: 0 – 170 cm (2 cm Step)
93
English