Installation Instructions; Tools Required; Grounding The Product; Staining Wood Drawer Fronts - GE ZDBI240WCII Installation Instructions Manual

Wine chiller, wine reserve and beverage center
Table of Contents

Advertisement

Installation
Instructions
TOOLS REOUIRED
• #2 Phillips screwdriver
• Adjustable wrench
PARTS SUPPLIED
• Honogram nameplate
Hardware for changing door swing
Optional stainless steel toekick with screws and
spacers
Left and right side hinge covers
Top screw hole cover
GROUNDING
THE WINE CHILLER,
WINE RESERVE AND BEVERAGE
CENTER
IMPORTANT - Please
read
c arefully.
FOR PERSONAL SAFETY, T HISAPPLIANCEHUST BE
PROPERLY GROUNDED.
The power cord of this appliance is equipped with
a three-prong (grounding) plug which mates with a
standard three-prong (grounding) wall receptacle to
minimize the possibility of electric shock hazard from
this appliance.
Have the wall outlet and circuit checked by a qualified
electrician to make sure the outlet is properly grounded.
Where a standard 2-prong wall outlet is encountered, it
is your personal responsibility and obligation to have it
replaced with a properly grounded ]-prong wall outlet.
DO NOT, UNDER ANY
CIRCUMSTANCES, CUT
OR REMOVE THE THIRD
(GROUND) PRONG
FROM THE POWER CORD.
DO NOT USE AN ADAPTER PLUG TO CONNECT THE
REFRIGERATORTO A 2-PRONG OUTLET.
DO NOT USE AN EXTENSION CORD WITH THIS
APPLIANCE.
STAINING WOOD DRAWER FRONTS
The drawer fronts are unfinished cherry wood. During
use, oil from hands may accumulate and stain the
wood.
The drawer fronts may be stained and sealed to
match adjacent cabinetry. The tinted glass will make
the stained wood appear darker. A true color match
can be seen only when the door is opened.
Apply the stain and sealer according to the
manufacturer's instructions. To avoid unpleasant
odor, keep the door open to ventilate and allow
the stain/sealer to dry completely before using
the product.
INSTALLING THE CUSTOM FRAME PANEL
Go to page rofor custom frame panel size, depending
on your cabinet size and style.
Install a custom handle of your choice onto the
custom panel before the panel is secured to the door.
The custom panel should be installed before sliding
the product into the installation location.
[STEP lj REMOVE PACKAGING
• Remove corner blocks and foam drawer stops.
Remove all packing material, tape and protective
plastic coverings.
Remove stainless steel toekick taped to the back
of the unit.
ACAUTION:
Small objects area choke
hazard for children. Remove and discard any parts
not used.
NISE
EN GARDE
: Yespetits
objets peuvent _trangler les enfants. II fautjeter toutes
les pi_ces qui ne sont pas utilis_es.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Zdbr240pcbsZdbc240ncbsZdwi240Zdbi240Zdwc240Zdwr240 ... Show all

Table of Contents