Table of Contents
Advertisement
32
en | Additional Devices
7.5.2
Programming with the microSD memory card
Programming the Carephone 61 with the microSD memory card
consists of calling different programming functions. These
programming functions are executed with special key
combinations.
NOTICE!
Before programming with the microSD memory card, make sure
that the Carephone 61 is connected to the mains with the
power supply unit.
Press the key combination of your choice and the unit will
perform the function associated to it.
NOTICE!
Before reading from the microSD memory card, make sure that
it contains a file. Before writing to the microSD memory card,
make sure that it is not write-protected. Existing files with same
names will be overwritten.
Read settings from the microSD memory card to the
Carephone 61:
Function
Read factory settings
Read user settings
Read firmware
Read user settings (programming
steps 91 and 30 will not be
modified)
NOTICE!
After reading the firmware to the Carephone 61 (key
combination P, F and 3), make sure to perform a test alarm.
See Section 6.3 Test instructions, page 26.
F.01U.239.30x | V1 | 2011.06
Press together for at least 2 s:
P, F and 1
P, F and 2
P, F and 3
P, F and 4
User Manual
Carephone 61
Bosch Security Systems
Advertisement
Table of Contents
