Advertisement
Replacing the Lamp
Replacing the Lamp
1
Turn off the projector and unplug the power cable.
Carefully place on a cushioned surface.
(Allow the lamp to cool for 1 hour before
removing the used lamp from the projector.)
2
Unscrew the screw from the lamp cover using a
screwdriver.
3
After lifting the lamp cover off, remove the two
retaining screws on the lamp case with a screwdriver.
4
Lift up the fixed wire knob on the lamp.
5
Pull out the handle slowly and remove the lamp case.
6
Insert the new lamp gently into the correct position.
Make sure it is inserted correctly.
Lamp case screw
Screws
Knob
Advertisement
