Page 1
Haier Solar Water Heater S75ENF S85ENF S110ENF S125ENF S150ENF Please read this manual before usage Retain it for future reference S75ENL S85ENL S110ENL S125ENL S150ENL User’s Manual...
Installing the vacuum tubes Schematic drawing of the indoor pipeline and wiring Precautions in pipeline installation Connection method of water supply pipeline in the houses where a solar water heat coexists with another type of water heater Operation instructions Operation method Packing list...
The tank liner is made of SUS304 stainless steel. It is a food grade material featuring high anti-corrosion ability and durability. 2. Effective and energy-saving heat insulation layer Polyurethane foam material for solar water heater is adopted to ensure high heat insulation ability and reduce heat loss to the maximum extent. 3. Al-Zn alloy coated tank shell Al-Zn alloy coated steel plate has very strong anti-corrosion ability and excellent weatherability.
6. When sunshine is not sufficient, to ensure effect, you should avoid using hot water several times in one day. 7. The energy source of this water heater is solar energy. In cloudy, rainy, or snowy days, the temperature of the water coming from it may not be satisfactory due to insufficient sunshine.
To ensure correct and safe use of the water heater, here we inform the users seriously to contact professional service agents appointed by Haier for installation and services. Haier is not responsible for incorrect installation of the water heater. To contact Haier headquarter, please dial: 4006 999 999 This product is an insured product.
Notes: 1. Ensure close contact of all legs of the water heater with the support plane. No legs are allowed to hang in the air as this may cause deformation of the bracket and thus damage the water heater.
Installation instructions Installing the vacuum tubes 1. Before installing, the vacuum tubes should be protected from sunshine. Otherwise you may be burned during installation. 2. Put the wind shroud on a vacuum tube (Fig. A). 3. Insert the vacuum tube with even force while rotating to turn it into the seal rings. The direction of the resultant force should be consistent with the axis of the vacuum tube.
Precautions in pipeline installation 1. Any form of modification of the installation structure of the water heater may cause problems in use. 2. There are 5 ways for the heater pipeline to enter the house: flue, exhaust pipe, penetrating hole, special pipeline well for solar water heater, embedded bushing.
Wait until the water supply becomes normal Repair or replace the pipeline or joints Close the valve tightly or replace the damaged valve Remove the shading object or relocate the water heater Clean the surface of the vacuum tubes Quantity 110L 125L 150L...