Table of Contents
Advertisement
Connecting the Video Cord to View a Video/Picture from iPod/iPhone/iPad
When viewing a video/picture from iPod/iPhone/iPad on your TV, use a component video cord
(not supplied) to connect the COMPONENT VIDEO OUT jack on the unit and the component
video input on your TV.
•
After you have connected the unit, change the video input mode on your TV. For details,
also refer to the insrtuction manual for your TV.
The below diagram show the connection options available.
NOTE: Consult your iPod documentation for details on how to enable video output on you
model of iPod / iPhone / iPad.
DC IN
AUX IN
Pr
The VIDEO OUT to TV is only available for vertical docking connector the
upper right corner dock is not supported the VIDEO output to TV for the iPad.
Remarks:
•
When you have your iPod outputting video and the unit connected to your TV, you may
need to change the output setting to TV output.
•
Press the VIDEO OUT button on the remote control to escape the current video playback,
then press ENTER or Play(iPad) to resume on TV screen.
Video play on iPod / iPhone / iPad
NOTES:
•
Due to the software used in iPod Nano 3G & iPod Classic, to change the video the
video output mode you will need to press the MENU button to escape the current video
playback, then press ENTER to resume.
•
Component video output to television is supported by iPod nano (3rd, 4th and 5th
generation), iPod touch (2nd generation), and iPod classic at 480p or 576p resolution;
and by iPod touch (1st generation), iPhone, iPhone 3G, iPhone 3GS, iPhone 4, and iPad
at 480p or 576p resolution.
VIDEO OPERATION
COMPONENT
VIDEO OUT
Y
Pb
COMPONENT
DC IN
VIDEO OUT
AUX IN
Pr
Y
To Component input of TV
TV out with Component out
11
Pb
Cable (not supplied)
TV
Advertisement
Table of Contents
