Cooktop Burners - GE JGP628 Installation Instructions Manual

Installation Instructions
COOKTOP BURNERS
ASSEMBLING THE COOKTOP
BURNERS
The electrode of the spark igniter is exposed. Be
careful not to push any cooktop controls while the
top of the burner is removed.
Do not remove the top or touch the electrode
of any burner while another burner is turned on.
Electrical shock might result.
Reploce the burner head onto the burner
bose, making sure that the heod is properly
oriented over the burner bose ond the
electrode. Moke sure to place
the correct burner head on the correct burner
bose and thor the burner head sits level on
the burner bose. The burner heads ore not
interchongeoble.
[]
Place the burner
cops on the burner
heads, making sure
to place the correct
burner cop on the
correct burner
head. The burner
cops ore not
interchangeable.
Make sure that the
burner cops ore
properly seated on
the burner heads.
Burner cop properly seoted
Burner cop not properly seoted
[]
Make sure the pins in
the burner heads
match the burner
bose indentutions
und that they ore
properly seated in
them by rotating the
heuds until they ore
level.
Make sure the slot in
the burner head
is positioned
over the
electrode. The
burner cup has
three to four
pins. When
replucing the
cup, make
sure none of
the pins sits
in the stability
chamber.
Burner cop
Burner heod
_ectrode
__Burner
Pin base
indentations
Stabilit_
chamber _
Electrode
Burnerbase
Make sure the hole
Burner cop
in the burner head
assembly is positioned
over the electrode and
Burner head
that the burner heod is ossembly _r_-_]b,
fully inserted inside the
burner bose. A small
gop between the bose
and head is normal.
Electrode Burner
bose
10