With A Duress Passcode; With Doors Or Windows Open - Bosch Security Systems User Manual

To Turn the Security System Off To Turn the Security System Off To Turn the Security System Off
To Turn the Security System Off To Turn the Security System Off
(Disarm): (Disarm): (Disarm):
(Disarm): (Disarm):
1. Enter your personal passcode and press ENT
2. You must press the ENT
of entering your passcode, or the passcode entry
is invalid. The display returns to idle disarmed
text.
T T T T T ur ur ur ur urning t ning t ning t ning t ning the Sy he Sy he Sy he Sy he Sys s s s s t t t t t em On (Ar

With a Duress Passcode

With a Duress Passcode With a Duress Passcode With a Duress Passcode With a Duress Passcode
Your passcode may have a special duress feature that
is simply your personal passcode with its last digit
increased by 1 or 2.
If an intruder demands that you arm or disarm the
security system, you can use your duress passcode.
The duress passcode arms or disarms the system and
sends an alarm report to the security company. There
is no alarm tone or visual indication at the premises
that the report is sent. Check with your security
company before attempting to use this feature.
26
ENT key within 8 seconds ENT ENT ENT
em On (Arming) em On (Ar em On (Ar em On (Ar ming) ming) ming) ming)
T T T T T ur ur ur ur urning t ning t ning the Sy ning t ning t

With Doors or Windows Open

With Doors or Windows Open With Doors or Windows Open With Doors or Windows Open With Doors or Windows Open
If a protected door or window is open, you may have
ENT ENT
ENT. ENT
the option of "force arming" with that point faulted.
Faulted points (opened doors or windows) that are
force armed are not included in the system. The
remaining points arm normally.
Force armed points either return to normal operation
after you turn off your system or return to normal when
the door or window is closed. The system may not
offer force arming or it may be restricted to specific
points. Contact your security company for more
information.
1. Use your passcode or an arming function to start
the arming process.
2. The display shows CHK AREA X
and and
and and
3. Press NEXT
point text for each faulted point. FORCE ARM
displays after the text for the last faulted point.
Press the COMMAND
ARM ARM
ARM ARM before reaching the text for the last point. ARM
he Sy he Sy he Sys s s s s t t t t t em On (Ar he Sy em On (Ar em On (Ar em On (Ar em On (Arming)
CHK AREA X CHK AREA X
CHK AREA X CHK AREA X.
NEXT NEXT repeatedly to scroll through the NEXT NEXT
COMMAND COMMAND COMMAND COMMAND bar to display FORCE
ming) ming) ming) ming)
FORCE ARM FORCE ARM
FORCE ARM FORCE ARM
FORCE FORCE FORCE FORCE