30" Appliances - Bosch HBL33 Installation Manual

Hide thumbs Also See for HBL33:
Table of Contents

Advertisement

Available languages

Available languages

30" Appliances
Dimensions for 30" Wall-Mounted Units
2713/16"
(706ram)
24"
(610ram)
(718mm)
r
27"
(686ram)
237/8" (606rara)
22" (559mm)
rain. 43/4" (121ram)
max. 313/8"(7971
Single Oven 30"
It is good practice, when oven is installed
at the end of a cabinet run, adjacent to a
perpendicular wall or cabinet door, to
allow at least 1/4" space between the
side of the oven and the wall/door.
For oven support, install 2x4's extending
front to back flush with the bottom and
the side of the opening. The supporting
base must be well secured to the floor/
cabinet and level.
Note: The conduit box must be installed
either above or below the unit. If the
conduit box is installed below the unit, a
2" diameter hole or space is required
between the back wall and the right rear
of the 2x4 supports.
The cabinet base must be flat and
capable of supporting a weight of at
least 190 Ibs (86 kg).
293/4"
(755rara)
2713/16"
(706ram)
513/4"
(1314tara)
493/4"
(1264rara)
237/8" (606rara)
L¢ 22" (559rara)
511/8"
(1299ram)
93/4"
(248rara)
Double Oven 30"
It is good practice, when oven is
installed at the end of a cabinet run,
adjacent to a perpendicular wall or
cabinet door, to allow at least 1/4"
space between the side of the oven
and the wall/door.
For oven support, install 2x4's
extending front to back flush with the
bottom and the side of the opening.
The supporting base must be well
secured to the floor/cabinet and level.
Note: The conduit box must be located
above the unit to facilitate connecting
and servicing.
The cabinet base must be flat and
capable of supporting a weight of at
least 330 Ibs (150 kg).
English 6

Advertisement

Chapters

Table of Contents
loading

Table of Contents