Pip Function; Pip Position - Haier 42EP25SAT Owner's Manual

Viewing Picture - in- Picture
This product has one built-in tuner, which does not allow PIP to function in the same mode. For example, you cannot
-
watch one TV channel in the main screen, and a different one in the PIP screen.
- The PIP function is be used only in DTV and VIDEO1 modes.
- If CC mode is ON, the CC display only in MP window.

PIP function

Press the PIP button on the remote controller, the screen show PIP PBP and Main Picture window in turns .
Note:
1
When press the PIP button on the remote controller , the PIP show in the default position which is top left corner,
in PIP mode the bigger window is called main window(MP) and another is called submain window(PIP) ;
in PBP the right window is called main window(MP) and left window is called submain window(PBP).
2
When press PIP button, focus on the MP, any operation is to MP.
3
If the PIP window is DTV signal, the operation of the CH+/- button is PIP window.

PIP Position

In PIP mode, press the POSITION button to select the position of the PIP window. As following.
40 PLASMA TV
Operation