General Information - Haier 120505609 Use And Maintenance Manual

General information

Measures must be taken to ensure that built-under and built-in units that are subsequently re-sited as
free-standing appliances cannot topple over. This can be achieved by bolting the dishwasher to the
wall or fitting it under a continuous work surface which is screwed to the adjacent cupboards.
For Switzerland only:
There are no restrictions on installing the appliance between wooden or plastic walls as part of a fitted
kitchen. If the appliance is not plugged into a wall socket, it must be connected to the mains via a
separator for all poles within the domestic wiring system. This device must have a gap of at least 3mm
between open contacts, in order to conform with relevant safety regulations.
Information on comparability tests implemented in compliance with
EN 50242
Appliance loaded in accordance with standard specifications.
Example of loaded dishwasher: See Fig 1 , 2 and 3.
Capacity: 15 place settings
Comparability programme: Normal wash
Rinse-aid setting: 5
Detergent: 30+7.5g
Height-adjustable top-basket must be inserted in the uppermost position.
If the comparability tests do not comply fully with EN 50242, e.g., degree of soiling, type of dishes and
cutlery, etc., contact the appliance manufacturer before starting the test.
27
Fig.1
1
3
Fig.2
en
4 4 4
4 4 4
2 3 1
2 3 2
1 3 1
2 3 2
2
3
1 1
2 3 2
1 3 1
2 3 2
1 3 1
3
2 2
1 3 1
2 3 2
1 3 1
4
2 3 2
Fig.3
1 3 1