Disk Operations; Operable Disk Configuration - NEC N8800-162F User Manual

3-2 Linux Setup and Operation

DISK OPERATIONS

NEC Express5800/ft series duplicates disks to secure data integrity by Software-RAID. This section
describes how to replace a disk.
IMPORTANT:
It is recommended to create only a system partition on the disks with OS.
When you create a partition other than a system partition on the disk with the OS,
note the following:
If you reinstall the OS, the entire disk will be cleared. If there is any data partition other than the
system partition, the data must be backed up before reinstalling the OS.

Operable disk configuration

RAID must be configured for all the internal disks in NEC Express5800/ft series.
As shown on the below chart, the internal disks redundancy is configured by software RAID with
the internal disks of corresponding slots.
Slot 1 Slot 3
Slot 0 Slot 2
Slot 0 Slot 2
Slot 1 Slot 3
Slots corresponding to the mirroring process
Slot 5 Slot 7
Slot 4 Slot 6
Slot 4 Slot 6
Slot 5 Slot 7