Wan Activation; Gsm Activation; Cdma Activation - Motorola ET1 Quick Start Manual

WAN Activation

In order to use the WAN radio for data communication, the
ET1N2 must be activated on the service provider's network. By
default, the ET1N2 is configured for a GSM network. To activate
on a CDMA network, manually configuration is required.
For WAN data configuration, refer to the ET1 Integrator Guide.

GSM Activation

When the ET1N2 turns on it automatically configures for the
network. If the SIM card requires a PIN, the PIN screen appears.
Enter the PIN and touch OK.

CDMA Activation

Prior to using the ET1N2 on a CDMA network, the ET1 must be
registered with the service provider. Contact the service provider
to set up an account and provide the MEID number (located
under the battery).
By default, the ET1N2 is configured for a GSM network. To
activate on a CDMA network:
Touch > More... > Mobile networks > Technology
1.
preferences > Network mode.
In the Network mode menu, select either Sprint or Verizon.
2.
The Activate the ET1 screen appears.
If a Connection Unsuccessful message appears reset the
ET1N2:
Press and hold the Power button until the Device options
a.
menu appears.
Touch Reset. After resetting the Activate the ET1 screen
b.
appears.
Touch Activate. The ET1N2 begins the activation process. If
3.
the activation is unsuccessful, contact the service provider.
7