Digital Photo Frame
Installation and connection of product
Installing Stand
1
Please set up by gently pulling the
product stand.
Connecting Power Cord
After connecting power adapter to DC 9V IN terminal at the product side, please connect
1
power code.
2
Press the POWER button
When turning off the power, press the POWER button for 2~3 seconds until the screen goes off.
Note
After setting up the stand, please check if the product is stable. Unless the product is setup correctly, there could be
possible danger of damage from the product's knocking or falling down.
When Auto setting up Orientation menu of the Setup, the image automatically rotates as well.
But Menu and Key-Help don't rotate.
The product and it accessories may look different from those shown here.
You can use by setting up horizontally or vertically.
2
on the back of the product or remote to turn the power on.
8