Product Specifications - HP Irvine User Manual

1-1 Product Specifications

CPU
Front Side Bus
Chipset
Memory
Onboard Graphics
Audio
LAN
Expansion Slots
Onboard Serial ATA II
USB
Internal Connectors
Back Panel
Connectors
Support for Intel ® Core
processors / Intel ® Pentium ® Dual Core E2xx0 (Conroe1M) processor /
Intel ® Celeron ® 4xx (Conroe-L) processor in the LGA 775 package
Support for Intel ® Hyper-Threading Technology
1333/1066/800 MHz (FSB)
NVIDIA GeForce 7100 / nForce 630i
2 x 240-pin DDR2 DIMM sockets
Support up to 4GB of system memory
Single channel DDR2 800/667/533MHz architecture
Integrated in the GeForce 7100 / nForce 630i Chipset
Realtek ALC888S-GR codec
High Definition Audio
2/4/5.1-channel
Support for S/PDIF Out
Support Jack-Sensing function
RTL 8201 10/100Mb/s Ethernet PHY
1 x PCI Express x16 slot
1 x PCI Express x1 slot
2 x SATA II connectors
300MB/s data transfer rate
Support hot plug and NCQ (Native Command Queuing )
Support hot plug
Support up to 10 USB 2.0 ports (4 rear panel ports, 3 onboard USB
headers providing 6 extra ports)
Supports USB 2.0 protocol up to 480Mb/s
1 x 24-pin ATX main power connector
2 x SATA connectors
3 x USB 2.0 headers (supporting 6 x USB devices)
1 x CPU fan header (4-pin)
1 x Front panel header
1 x Front audio header
1 x S/PDIF_OUT header
1 x PS/2 keyboard port
1 x PS/2 mouse port
1 x Coaxial S/PDIF Out connector
1 x VGA port
4 x USB 2.0/1.1 ports
1 x RJ-45 port
1 x 1394a port
1 x DVI port
6 x audio jacks (Center/Subwoofer Speaker Out/Rear Speaker Out/Side
Speaker Out/Line In/Line Out/Microphone)
2 Duo E6x50, E6x20, E6x00, E4x00 (Conroe)
TM
2