Silvercrest KH 6506 Operating Manual page 16

Table of Contents

Advertisement

Skip to start of chapter (SKIP)
NOTE:
This function may not be available on all DVDs/VCDs/S-VCDs!
If you attempt to carry out a function that is not available the
symbol
will be displayed on the television screen.
Within the film on the inserted DVD/VCD/S-VCD during play-
back the buttons
"SKIP forward" and
on the remote control or on the front panel of the appliance
allows you to skip...
• forward to the beginning of the next chapter or
• backward to the preceeding chapter
The respectively selected chapter will playback immediately
without the necessity of pressing the button
number of the respectively selected chapter will be displayed
on the front panel of the DVD player to the left of the played
back so far time.
Title number input via the number buttons
NOTE:
This function may not be available on all DVDs/VCDs/S-VCDs!
If you attempt to carry out a function that is not available the
symbol
will be displayed on the television screen.
Instead of using the Skip function you can also access a title
from within the film of an inserted DVD/VCD/S-VCD directly
by entering the title number via the number buttons 0 to 9
on the remote control.
To do this ...
• During playback or when playback is cancelled press the
number buttons on the remote control that correspond to
the title number that you want i.e. press the "3" button
for the third title or the buttons "1" followed by "0" for
the tenth title. The entered numbers will be briefly super-
imposed on the television screen.
• Then press the "OK" button on the remote control.
Playback of the entered number title will now start auto-
matically.
Search function (Search)
To select a title or chapter from the inserted DVD/VCD/S-VCD
direct you can also use the search function:
Direct chapter or time selection using the search function
(Search)
NOTE:
This function may not be available on all DVDs/VCDs/S-VCDs!
If you attempt to carry out functions that are not available
the symbol
will be displayed on the television screen.
Entry of the time position via the search function
In order to select a chapter by entering its time position ...
• During playback press the button
mote control. The "Search" Menu will be superimposed on
the television screen.
"SKIP backward"
• The "– – –" marked entry field "Title" is automatically the
first selection. Enter the desired title with the number but-
tons 0 to 9. On DVDs title 01 is most often the main film.
"PLAY". The
• Press the control button
"– – –" marked entry field. Enter the desired chapter with
the number buttons 0 to 9.
• Press the control button
"-- -- : -- -- : – –" marked entry field. With the number but-
tons 0 to 9 enter the time position in hours, minutes and
seconds.
Example: To begin playback 1 hour, 5 minutes and 30 seconds
from the start of a film press successively the number buttons
...
• "0", "1" for 1 hour;
• "0", "5" for 5 minutes;
• "3", "0" for 30 seconds
Subsequently press the "OK" button to start playback from
the selected position.
If you want to remove a position from the entry field select
the position to be removed with the control buttons
press the "CLR" button on the remote control.
The display now skips back to "– – –".
To fade out the "Search" menu press the button
again on the remote control.
Fast scan forward/backward
In order to select specific passages in fast scan mode during
playback of the inserted DVD/VCD/S-VCD ...
• For fast scan forward press the button
• once for doubled fast scan speed; "x2" is displayed on the
television screen
• twice for four times fast scan speed; "x4" is displayed on
the television screen
• three times for eight times fast scan speed; "x8" is display-
ed on the television screen
• four times for sixteen times fast scan speed; "x16" is dis-
played on the television screen
- 15 -
KH 6506
"SEARCH" on the re-
to select the "Chapter" with the
to select the "Time" with the
"SEARCH"
"F.FWD"...
and

Advertisement

Table of Contents
loading

Table of Contents