Nokia 6310i User Manual page 46

M e n u f u n c t i o n s
visit Club Nokia's Web site
(www.club.nokia.com).
You can also key in the settings manually. For
appropriate settings, contact your network
operator or service provider. The WAP settings
may be available, for example, on the Web
site of the network operator or service
provider.
Saving the service settings received as
a text message
When you receive the service settings as a
text message, Service settings received
displayed.
• To save and activate the received settings,
press Options and select Save.
If no settings are saved in
settings, the settings are saved under the
first available connection set and
activated.
• To discard the received settings, press
Options and select Discard.
• To view the received settings first, press
Options and select View. To save the
settings, press Save.
Keying in the service settings manually
1. Press Menu, select Services, and Settings.
2. Select Active service
You need to activate the set where you
want to save the service settings. A set is a
collection of settings needed for making a
connection to a WAP service.
3. Scroll to the set you would like to activate
and press Activate.
4. Select Edit active service
Select each of the service settings one by
one and key in all the required settings.
• Settings' name
for the settings set and press OK.
46
is
Active service
settings.
settings.
- Key in the new name
Copyright © 2004 Nokia. All rights reserved
• Homepage - Key in the homepage
address of the WAP service that you
want to use and press OK.
• Session mode - Select
Temporary.
• Connection security
When the connection security is On,
the phone tries to use a secure
connection with the WAP service. If a
secure connection is not available, the
connection will not be made. If you
wish to connect anyway, with a non-
secure connection, you must set the
connection security to Off.
• Data bearer - Select
GPRS. For pricing, connection speed
and other information, contact your
network operator or service provider.
The following options depend on the
selected data bearer:
When GSM data is the selected data
bearer:
• Dial-up number - Key in the phone
number and press OK.
• IP address - Key in the address and
press OK. You obtain the IP address
from your network operator or service
provider.
• Authentication type
Normal.
• Data call type - Select
ISDN.
• Data call speed - Select the speed you
want to use, or select Automatic.
Automatic is available only if the
current selected data call type is
Analogue. The actual data call speed
depends on the service provider.
• Login type - Select
Automatic. If you select Automatic,
the login type uses the user name and
Permanent or
- Select On or Off.
GSM data or
- Select Secure or
Analogue or
Manual or