Switching On And Off With Soft Reset (Warm Boot); Switching On And Off With Full Reset Switch - Fujitsu LOOX 610 Easy Manual

Switching on and off with soft reset (warm boot)

After certain applications or the installation of new programs, it may be necessary to restart the
Pocket PC with the soft reset.
Data not yet saved in a file will be lost during this procedure. On the other hand, data in
!
the RAM memory are retained.
Ê
End all applications before you carry out a soft reset.
1
Ê
Take the stylus, insert it in the opening (1) and press briefly.
The warm boot is carried out. The application you have just been working in appears on the display
of your Pocket PC.

Switching on and off with Full Reset switch

If your Pocket PC does not continue operating and switching off and on with the Suspend button
and the soft reset fail to function, you can reset your Pocket PC to the delivered state.
If the device is switched off with the Full Reset switch, the battery is switched off so that
!
the RAM contents are lost. This means you loose all data (documents, additionally
installed programs, personal settings) that you haven't saved elsewhere.
Therefore, remember to make a regular data backup with synchronisation (see the
"Synchronising data with ActiveSync" chapter) or on corresponding memory cards
(available as an accessory). The FSC Backup program is provided on your Pocket LOOX
610 for completely backing up the RAM memory on memory cards (see the "Backing up
data with FSC Backup" chapter ).
A26391-K139-Z120-2-7619
Operating pocket LOOX 610
1 = Soft reset (warm start)
17