Using A Headset - Hitachi SelecSet 400A User Manual

C 2: A
HAPTER DDITIONAL

Using a Headset

Connecting a
headset
Headset modes
Mode
Switchhook mode 1
Headset mode
HCXTD830, Rev. A01, July 2001
O
PERATIONS
To use a headset with the SelecSet 400A, you must
connect the 400A by plugging it into the standard handset
jack.
Three headset modes are available:
Disconnect the handset from the handset port and
connect the headset to the handset port
2
To place or answer a call, remove the handset from the
cradle.
3
Press <SPK> and listen/speak through the headset
(Headset mode is not turned on in the SelecSet 400A's
basic class).
4
To disconnect, press <SPK>
1
Your SelecSet 400A rings. Press <START> to
answer/disconnect. The handset remains in the cradle.
2
Listen/speak through the headset. (Headset mode is
turned on in the SelecSet 400A's BCL.)
Check with your administrator to find out which headset
mode is in effect for your system.
Description
U H
SING A EADSET
2-61