Table of Contents
Advertisement
Key Format
Default Tx Key
Encryption Key 1
Encryption Key 2
Encryption Key 3
Encryption Key 4
Apply Changes
Reset
WEP encryption key (secret key) length:
Length
Format
3.3.5 Wireless Access Control
If you enable wireless access control, only those clients whose wireless MAC
addresses are in the access control list will be able to connect to your Access Point.
When this option is enabled, no wireless clients will be able to connect if the list
contains no entries.
bits) and secret key (40-bit or 104-bit).
Select the WEP shared secret key format from pull-down
menu. The format can be chose between plant text
(ASCII) and hexadecimal (HEX) code.
Set the default secret key for WEP security function.
Value can be chose between 1 and 4.
Secret key 1 of WEP security encryption function.
Secret key 2 of WEP security encryption function.
Secret key 3 of WEP security encryption function.
Secret key 4 of WEP security encryption function.
Click the Apply Changes button to complete the new
configuration setting.
Click the Reset button to abort change and recover the
previous configuration setting.
64-bit
ASCII
5 characters
HEX
10 hexadecimal codes
14
128-bit
13 characters
26 hexadecimal codes
Advertisement
Table of Contents
