Connecting The Power Cord; Setting Up The Remote Control - Acer MG3001-p User Manual

Connecting the power cord

1. Locate the AC input port on the rear of the device and insert the power cord jack.
2. Insert the connector end of the power cord into the AC adapter.
3. Insert the power cord plug into the power source.

Setting up the remote control

1. Open the cover on the back of the remote unit.
2. Insert two AAA batteries (supplied) by the matching the + and – on the batteries
to the diagram inside the battery compartment.
Taking care of your remote control
Follow these steps to ensure proper care of your remote control:
•
Handle the remote control with care. Dropping it, placing it in direct sunlight,
or allowing it to get wet may cause damage.
•
Do not tamper with the batteries, and keep them away from children.
•
When you anticipate that the remote control will not be used for an extended
period, remove the batteries to prevent possible damage from battery
leakage.
•
Dispose of used batteries according to local regulations. Recycle if possible.
Acer MG 3001-P User's Guide
17