Toshiba Strata DK 280 User Manual page 54

:I
3. Press Spkr.
To Clear Name/Number
Display:
1. Press a
[DN] +
#620.
2. Press Spkr.
During clear:
After clear:
To Erase Name/Number
Information:
1. Press a
[DN] +
#621.
2. Press 1 in the alpha
mode to enter blanks.
3. Press Spkr.
The new information is stored and will appear on the top line of the display. For
example, if you entered "TOSHIBA EXT. 200", that will appear above the
date/day/time on the display.
You will hear a confirmation tone, then a busy tone.
Notes:
1.
When user name is set, your title will appear on the LCD during
direct, forwarded, and hunted calls. On override or OCA calls, the
LCD will not display the title.
2.
After a name is cleared, it may be redisplayed at any time by
pressing a
[DN] + # 6 2 1.
3. A name is displaced by message and call forward settings if they
are set.
Current information will appear on the lower line of the LCD.
To erase name/number information from memory, enter blanks at the 'User
Name" prompt. Refer to "Recording a Message" earlier in this chapter for more
information.
;, :
The erased name/number information should be gone.
!) /
44