Table of Contents
Advertisement
Features
3. After receiving the
message(s), place the
handset on hook.
To cancel the Message Waiting on your [PDN]
Press
the handset
...or [DN] +
cancel the light. This
must be done for each
message recorded.
To retrieve a Message Waiting on your [PhDN]
1. Press the flashing red
MW/FL LED.
2. Press
receiving the message
...or place the handset
on-hook.
To cancel the Message Waiting on your [PhDN]
1. Press
2. Enter
3. Press
Strata CT Electronic Telephone User Guide November 2001
If the MW/FL LED continues to flash, you have more
messages—repeat the Steps to retrieve them. Voice mail
devices may cancel the indication after a short delay.
MW/FL
MW/FL
MW/FL
MW/FL
and lift
Your MW/FL LED turns OFF when the called party answers.
Note
#409
#409
#409
#409
to
Your MW/FL LED turns OFF without calling the telephone or
VM device.
Your phone rings the station or voice mail device that left the
message. If the called party or voice mail device answers, the
message waiting indication is cancelled automatically.
If there is no answer, hang up and try at a later time. The red
MW/FL LED on your phone continues to flash.
SPKR
SPKR
SPKR
SPKR
after
If you have more messages, the MW/FL LED continues to
flash (red). To answer the next message. Repeat this procedure.
MW/FL
MW/FL
MW/FL
MW/FL
.
You hear a steady dial tone.
#409
#409
#409
#409
.
The dial tone stops.
SPKR
SPKR
SPKR
SPKR
.
The MW/FL LED turns OFF indicating that the message has
been cancelled.
The called party must answer by either going off-hook
SPKR
SPKR
SPKR
SPKR
or by pressing
for the call to be cancelled
automatically.
Message Waiting
49
Advertisement
Table of Contents
