Device Relationships And Mapping Information - HP 634041-006 Deployment Manual

5 Device relationships and mapping information

Each interconnect bay row in an HP BladeSystem c3000 or c7000 enclosure maps to servers via
the server expansion slot in which the controller card is installed. The following tables list the
mappings between server expansion slots and BladeSystem enclosure interconnect bays.
For information about which expansion slots are supported for use with your controller model, see
the user documents for the controller. For information about which controllers are supported for
use with the external storage enclosures, see
matrix" (page
Mappings for the c3000 BladeSystem enclosure:
BladeSystemc-Classenclosuremodel
c3000
Mappings for the c7000 BladeSystem enclosure:
BladeSystemc-Classenclosuremodel
c7000
* When using c7000 enclosures and P721m/P731m controllers, the 6Gb SAS BL Switch can be installed only in
c7000 interconnect bays 5, 6, 7, and 8, because the P721m/P731m controller cannot be installed in server expansion
slot 1, which maps to c7000 interconnect bays 3 and 4.
50 Device relationships and mapping information
77).
Server type
Half height
Full height
Full height Double wide
Server type
Half height
Full height
Full height Double wide
"External SAS device, controller, and drive support
Expansionslot
2
2
3
2
3
4
7
Expansionslot
1
2
1
2
3
1
2
3
4
5
7
BladeSystemc-Classinterconnect
bay
3/4
BladeSystemc-Classinterconnect
bay
3/4
5/6/7/8 *
3/4
5/6/7/8 *
5/6/7/8
3/4
5/6/7/8 *
5/6/7/8
5/6/7/8
3/4
5/6/7/8