Yamaha YZF-R1 Owner's Manual page 64

PERIODIC MAINTENANCE AND MINOR REPAIR
1. O-ring
6. Apply a thin coat of engine oil to
the O-ring of the new oil filter car-
tridge.
NOTE:
6
_
Make sure that the O-ring is properly
seated.
_
1. Torque wrench
7. Install the new oil filter cartridge,
and then tighten it to the specified
torque with a torque wrench.
Tightening torque:
Oil filter cartridge:
17 Nm (1.7 m·kgf)
8. Install the engine oil drain bolt, and
then tighten it to the specified
torque.
Tightening torque:
Engine oil drain bolt:
43 Nm (4.3 m·kgf)
6-11
9. Add the specified amount of the
recommended engine oil, and then
install and tighten the oil filler cap.
Recommended engine oil:
See page 8-1.
Oil quantity:
Without oil filter cartridge
replacement:
2.9 L
With oil filter cartridge
replacement:
3.1 L
Total amount (dry engine):
3.8 L
CAUTION:
_
G
In order to prevent clutch slip-
page (since the engine oil also
lubricates the clutch), do not
mix any chemical additives with
the oil or use oils of grade "CD"
or higher. In addition, do not
use oils labeled
CONSERVING II" or higher.
G Make sure that no foreign mate-
rial enters the crankcase.
_
ECA00105
"ENERGY