Yamaha YZF-R1 Owner's Manual page 27

For the UK only:
Push the "SELECT" button to switch
the display between the odometer
mode "ODO", the tripmeter modes
"TRIP 1" and "TRIP 2", the instanta-
neous fuel consumption mode "km/L",
"L/100 km" or "MPG", and the average
fuel consumption mode "AVE_ _._
km/L", "AVE_ _._ L/100 km" or "AVE_
_._ MPG" in the following order:
ODO → TRIP 1 → TRIP 2 → km/L,
L/100 km or MPG → AVE_ _._ km/L,
AVE_ _._ L/100 km or AVE_ _._ MPG
→ ODO
If the fuel level warning light comes on
(see page 3-4), the display automatical-
ly changes to the fuel reserve tripmeter
mode "TRIP F" and starts counting the
distance traveled from that point. In that
case, push the "SELECT" button to
switch the display between the various
tripmeter, odometer, instantaneous fuel
consumption and average fuel con-
sumption modes in the following order:
INSTRUMENT AND CONTROL FUNCTIONS
TRIP F → km/L or L/100 km → AVE_
_._ km/L or AVE_ _._ L/100 km →
ODO → TRIP 1 → TRIP 2 → TRIP F
For the UK only:
TRIP F → km/L, L/100 km or MPG →
AVE_ _._ km/L, AVE_ _._ L/100 km or
AVE_ _._ MPG → ODO → TRIP 1 →
TRIP 2 → TRIP F
To reset a tripmeter, select it by push-
ing the "SELECT" button, and then
push the "RESET" button for at least
one second.
If you do not reset the fuel reserve trip-
meter manually, it resets itself automat-
ically and the display returns to the prior
mode after refueling and traveling 5 km
(3 mi).
3-12
Instantaneous fuel consumption mode
1. Instantaneous fuel consumption
The instantaneous fuel consumption
display can be set to either "km/L",
"L/100 km" or "MPG" (for the UK only).
G
When the display is set to "km/L",
the distance that can be traveled
on 1.0 L of fuel under the current
riding conditions is shown.
G
When the display is set to "L/100
km", the amount of fuel necessary
to travel 100 km under the current
riding conditions is shown.
G For the UK only: When the display
is set to "MPG", the distance that
can be traveled on 1.0 Imp.gal of
fuel under the current riding condi-
tions is shown.
3
1