Auxiliary Dc Jack - Yamaha FJR1300AS Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS

Auxiliary DC jack

NOTICE
The accessory connected to the
auxiliary DC jack should not be used
with the engine turned off, and the
load must never exceed 30 W (2.5 A),
3 otherwise the battery may dis-
charge.
WARNING
To prevent electrical shock or short-
circuiting, make sure that the cap is
installed when the auxiliary DC jack
is not being used.
This vehicle is equipped with an auxilia-
ry DC jack in the accessory box.
A 12-V accessory connected to the
auxiliary jack can be used when the key
is in the "ON" position and should only
be used when the engine is running.
To use the auxiliary DC jack
1. Open the accessory box lid. (See
page 3-27.)
2. Turn the key to "OFF".
3. Remove the auxiliary DC jack cap.
EAU39652
ECA15430
1. Auxiliary DC jack cap
EWA14360
4. Insert the accessory plug into the
auxiliary DC jack.
1. Auxiliary DC jack
5. Turn the key to "ON", and then
start the engine. (See page 5-1.)
3-36