Table of Contents
Advertisement
2.4
BIOS configuration
You need to adjust the settings in the BIOS setup of the remote server for correct
configuration and connection to the cental server.
Update the remote server BIOS file following the instructions in the
motherboard/system user guide. Visit the ASUS website (www.asus.com) to
download the latest BIOS file for the motherboard.
2.4.1
AMI BIOS setup
Remote Access setup
To adjust the Remote Access settings:
1.
Restart the remote server, then press <Del> during POST to access the
BIOS setup.
2.
Go to the Server menu, select the Remote Access Configuration sub-menu,
then press <Enter>.
3.
Enable Remote Access, then set the following sub-menu items:
• Serial Port Number to [COM2]
• Baudrate to [57600]
• Terminal Type to [VT-UTF8]
• Media Type to [Serial]
Configure Remote Access type and parameters
Remote Access
Serial Port Number
Baudrate
Flow Control
Redirection After BIOS POST
Terminal Type
Media Type
4.
Press <Esc>, then select IPMI Configuration sub-menu from the Server
menu.
5.
Use this sub-menu to adjust the remote server LAN settings or view the
System Event Log (SEL).
6.
When finished, press <F10> to save your changes and exit the BIOS setup.
2-8
Server
[Enabled]
[COM2]
[57600]
[None]
[Always]
[VT-UTF8]
[Serial]
v02.58 (C)Copyright 1985-2004, American Megatrends, Inc.
BIOS SETUP UTILITY
Select Remote Access
type.
Select Screen
Select Item
+-
Change Option
F1
General Help
F10 Save and Exit
ESC Exit
Chapter 2: Installation
Advertisement
Table of Contents
