D-Link AIRPLUS DWL-900AP PLUS Manual page 15

Configuration Menu
The illustration at right shows
the recommended default
setting (Disabled) for the
DHCP Server function of the
DWL-900AP+. If you wish to
use the DWL-900AP+ as a
DHCP server (not
recommended if you already
have a DHCP enabled
router/gateway on your
network) then select Enabled.
Enter the IP Address range
and click Apply, if you have
made any changes.
MAC Address
(Media Access
Control Address)
A unique
hardware address
that identifies a
device on a
network. It is
assigned at the
factory and
cannot be
changed. Usually
you will find this
address on a
sticker on the
device or on the
packaging.
The DWL-900AP+ can be operated in 4 different modes to meet your networking
needs.
The default setting is Access Point mode. If you select Wireless Client mode,
input the MAC address of the Remote AP to which you wish to associate. If you
select Wireless Bridge mode, input the MAC address of the Remote Bridge to
which you wish to associate.
Advanced > Mode
Fig. 5.6
Home > DHCP
Fig. 5.5