Automatic Operation - Husqvarna QN 4035 Operating Instructions Manual

Automatic operation

The AUTOMATIC function automatically works out the
correct cooking mode and cooking time. You can choose
from 7 AUTOCOOK menus and 5 AUTO DEFROST
menus. What you need to know when using this
automatic function:
1. Press the AUTOMATIC PROGRAMMES button once,
the display will appear as shown.
The menu can be chosen by pressing the AUTOMATIC
PROGRAMMES button until the desired menu
number is displayed.
See pages 15 - 16 "AUTOMATIC charts".
To select a defrost menu, press the AUTOMATIC
PROGRAMMES button at least 8 times. If you press
the button 8 times,
The menu will be changed automatically by holding
down the AUTOMATIC PROGRAMMES button.
2. The weight or quantity of the food can be input by
rotating the TIMER/WEIGHT knob until the desired
weight is displayed.
• Enter the weight of the food only. Do not include the
weight of the container.
• For food weighing more or less than weights given in
the cooking chart, use manual programmes. For best
results, follow the cooking charts on pages 18 - 20.
3. To start cooking press START/QUICK button.
When action is required (e.g. to turn food over), the
oven stops and the audible signals sound, remaining
cooking time and any indicator will flash on the
display. To continue cooking, press the START/
QUICK button.
Example:
To cook gratin weighing 1,0 kg using AUTOCOOK AC-7.
1. Select the menu required by
pressing the AUTOMATIC
PROGRAMMES button seven
times.
14
will appear in the display.
2. Enter the weight by rotating
the TIMER/WEIGHT knob
clockwise.
x7
1.
AUTOMATIC PROGRAMMES button
2.
TIMER/WEIGHT knob
3.
START/QUICK button
The final temperature will vary according to the
initial food temperature. Check food is piping hot
after cooking. If necessary, you can extend the
cooking time and change the power level.
3. Press the START/QUICK
x1
Menu number
button.
x1
Check the display.