Table of Contents
Advertisement
Frontal spacer installation
When included in the package, and if
necessary, fix the frontal spacer with the 3
supplied M4x12 screws.
Unit connection
All the operations below require the
appliance to be extracted from
cabinet.
Remove the grid of the drip tray to
easily pull out the Refreshment
Centre. After extracting the appliance,
place the grid back in its original
position.
Electrical connection
Warning Before starting the plug-in,
make sure voltage and frequency
match the related information on the
rating plate and on the technical
specifications table.
Warning Make sure the main switch
is in off position
Connect the appliance to the socket using
the supplied cord.
When necessary, extract momentarily the
power cord from the safety clip to make
the connection to the power socket easier.
Fix the supplied cord to the clip on the
right side of appliance.
1
Frontal spacer
2
M4x12 screws
1
230V AC Socket
2
Clip to fix cord
electrolux 9
Advertisement
Table of Contents
