Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Electrolux ESF65050
Summary of Contents for Electrolux ESF65050
- Page 1 Dishwasher ESF65050...
-
Page 2: Table Of Contents
2 electrolux Electrolux. Thinking of you. Share more of our thinking at www.electrolux.com Contents Safety information Select and start a washing programme Product description Control panel Washing programmes Use of the appliance Care and cleaning Setting the water softener What to do if… Use of dishwasher salt Technical data Use of rinse aid... -
Page 3: Product Description
electrolux 3 Installation – if the mains cable or water hoses are damaged, • Make sure that the appliance is not dam- – if the control panel, worktop or plinth aged because of transport. Do not con- area are damaged, that you can get ac- nect a damaged appliance. -
Page 4: Control Panel
4 electrolux Control panel 3 4 5 Programme guide Programme knob Start/cancel button (Start Cancel) Multitab button (Multitab) Delay start button (Delay) Digital display Indicator lights Programme marker Off position Indicator lights Wash phase Comes on when the washing phase or the rinsing phase operates. Dry phase Comes on when the drying phase operates. -
Page 5: Use Of The Appliance
electrolux 5 – To deactivate/activate the rinse aid dis- • Adjusted level of the water softener. penser. Refer to 'Multitab function'. • Activation/deactivation of the rinse aid dis- penser (only with multitab function on). Start/cancel button • Programme duration. Use the start/cancel button for these opera- •... -
Page 6: Use Of Dishwasher Salt
6 electrolux Water hardness Water hardness setting °dH °TH mmol/l Clarke manually electronically 51 - 70 91 - 125 9,1 - 12,5 64 - 88 43 - 50 76 - 90 7,6 - 9,0 53 - 63 37 - 42 65 - 75 6,5 - 7,5 46 - 52... -
Page 7: Use Of Rinse Aid
electrolux 7 4. Remove the salt around the opening of the salt container. 5. Turn the cap clockwise to close the salt container. It is normal that water overflows from the salt container when you fill it with salt. When you set electronically the water soft- ener to level 1, the salt indicator light does not stay on. -
Page 8: Loading Cutlery And Dishes
8 electrolux 1. Turn the rinse aid dial to increase or de- crease the dosage. – Increase the dosage if there are water droplets or limescale on the dishes. – Decrease the dosage if there are streaks, whitish stains or bluish layers on the dishes. - Page 9 electrolux 9 Prevent to put plates in the first three Cutlery basket sectors in the front part of the basket. Warning! Do not put long-bladed knives Make sure the plates tilt forward. in a vertical position. Arrange long and Put glasses with long stems in the cup racks sharp cutlery horizontally in the upper with the stems up.
-
Page 10: Use Of Detergent
10 electrolux Do these steps to move the upper basket to the lower position: 1. Pull the basket out until it stops. 2. Carefully lift the two sides upwards. 3. Hold the mechanism and let it fall back down slowly. Caution! •... -
Page 11: Multitab Function
electrolux 11 Different brands of detergent dissolve in long washing programmes when you different times. Some detergent tablets use detergent tablets to fully remove the do not have the best cleaning results detergent. during short washing programmes. Use Multitab function The multitab function is for combi detergent To activate/deactivate the rinse aid dispens- tablets. - Page 12 12 electrolux – The phase indicator light or lights for – The countdown of the delay start the washing programme come on. starts. – The programme duration in the digital – The phase indicator lights of the wash- display flashes. ing programme go off.
-
Page 13: Washing Programmes
electrolux 13 Washing programmes Washing programmes Programme Degree of soil Type of load Programme description and pro- gramme knob position Crockery, cutlery, Prewash pots and pans Main wash up to 45°C or 70°C 1 or 2 intermediate rinses Final rinse Drying Normal or light soil Crockery and cutlery... - Page 14 14 electrolux Cleaning the filters Caution! Do not use the appliance without the filters. Make sure that the installation of the filters is correct. Incorrect installation will cause unsatisfactory washing results and damage to the appliance. If necessary, clean the filters. Dirty filters de- crease the washing results.
-
Page 15: What To Do If
electrolux 15 Frost precautions If not possible, empty the appliance and close the door. Disconnect the water inlet Caution! Do not install the appliance hose and remove water from the water inlet where the temperature is below 0 °C. hose. The manufacturer is not responsible for damage because of frost. -
Page 16: Technical Data
16 electrolux The cleaning results are not satisfactory The dishes are not clean • The selected washing programme is not applicable for the type of load and soil. • The baskets are loaded incorrectly so that water cannot reach all surfaces. -
Page 17: Water Connection
electrolux 17 4. Use the adjustable feet to adjust the level of the appliance. 5. Install the appliance under the kitchen worktop. Make sure that there are no kinks in the water hoses and that the wa- ter hoses are not squashed. If a repair is necessary, the appliance must 2. -
Page 18: Electrical Connection
18 electrolux Water drain hose If you connect the water drain hose to a trap spigot under the sink, remove the plastic 1. Connect the water drain hose to the sink membrane (A). If you do not remove the spigot and attach it under the work sur- membrane, remaining food can cause a face. - Page 19 electrolux 19 your household waste disposal service or the • Pull the mains plug out of the socket. shop where you purchased the product. • Cut off the mains cable and mains plug and discard them. The packaging materials are environmentally •...
- Page 20 www.electrolux.com 156983450-00-092009...