Advertisement

Quick Links

DF 1090
700 D
Dunstabzugshaube
Afzuigkap
Hotte
Cooker Hood
Montage- und Gebrauchsanweisung
Installatie- en gebruiksaanwijzing
Notice d'utilisation et d'installation
Operating and Installation Instructions

Advertisement

Table of Contents
loading

Summary of Contents for Electrolux DF 1090

  • Page 1 DF 1090 700 D Dunstabzugshaube Afzuigkap Hotte Cooker Hood Montage- und Gebrauchsanweisung Installatie- en gebruiksaanwijzing Notice d’utilisation et d’installation Operating and Installation Instructions...
  • Page 2: Table Of Contents

    Contents Safety warnings ................58 For the user ..................58 For the installer ................. 59 Description of the Appliance ............61 Control Panel .................. 61 Maintenance and Care ..............62 Metal grease filter ................62 Changing the light bulbs ..............63 Cleaning the hood ................
  • Page 3: Safety Warnings

    Safety warnings For the user • The cooker hood is designed to extract unpleasant odours from the kitchen, it will not extract steam. • Always cover lighted elements, to prevent excess heat from damaging the appliance. In the case of oil, gas and coal fired cookers it is essential to avoid open flames.
  • Page 4: For The Installer

    For the installer • When used as an extractor unit, the hood must be fitted with a hose having preferably the same diameter as the outlet hole. Attention: The hose is not supplied and must be purchased separately. • When installing the hood, make sure you observe the following minimum distance from the top edge of the cooking hob/ring surfaces: electric cookers...
  • Page 5 - never install the hoses with an acute angle, they must always follow a gentle curve. - keep the hose as large as possible (preferably the same diameter as the outlet hole). - the length should be no more than: 3 metres with one 90°...
  • Page 6: Description Of The Appliance

    Description of the Appliance • The hood is supplied with an electric valve placed on the A outlet. It is used in the suction variant and connected to a peripheral suction unit. • In this mode fumes are extracted to the outside via a hose connected to the coupling ring A.
  • Page 7: Maintenance And Care

    Maintenance and Care • The hood must always be disconnected from the electricity supply before beginning any maintenance work. Metal grease filter • The purpose of the grease filters is to absorb grease particles which form during cooking and it must always be used, either in the external extraction or internal re-circulation function.
  • Page 8: Changing The Light Bulbs

    Warning • Failure to observe the instructions on cleaning the unit and changing the filters will cause a fire hazard. You are therefore strongly recommended to follow these instructions. • The manufacturer declines all responsibility for any damage to the motor or any fire damage linked to inappropriate maintenance or failure to observe the above safety recommendations.
  • Page 9: Technical Assistance Service

    Technical assistance service (not for UK) You are welcome to telephone our technical assistance service (see list of technical assistance centres) whenever you need information or in the unlikely event of a fault. For service in Australia call 1300 650 020. When calling, please be ready to specify: The model code number The serial number (E-Nr.)
  • Page 10: Customer Care Department

    Major Appliances AEGElectrolux Addington Way Luton Bedfordshire LU4 9QQ 08705 350 350 (*) * calls to this number may be recorded for training purposes Technical Details DF 1090 700 D Dimensions (in cm): Height: 17,5 17,5 Width: 89,8 59,8 Depth:...
  • Page 11: Electrical Connection

    Electrical connection (not for UK) Safety warnings for the electrician Before connecting the appliance to the power supply, check that the voltage indicated on the rating plate corresponds to the mains power supply available. Appliances fitted with a plug can be connected to any standard power socket within easy access.
  • Page 12: Mounting The Hood

    Mounting the Hood If the wall unit is supplied of a base: • Make a Ø 115 mm hole for the discharge tube using the supplied template. • Also make the holes for fixing the hood as indicated on the supplied template.
  • Page 13: Assembly Using Side Bracket

    Assembly using side bracket The hood can also be mounted by means of two brackets supplied with the hood. To fix the hood in this way , proceed as follows: • Drill 2 holes Ø 2 mm on the two sides of the cupboard from the inside using the template supplied.
  • Page 17 From the Electrolux Group. The world´s No.1 choice. The Electrolux Group is the world´s largest producer of powered appliances for kitchen, cleaning and outdoor use. More than 55 million Electrolux Group products (such as refrigerators, cookers, washing machines,vacuum cleaners, chain saws and lawn mowers) are sold each year to a value of approx.

This manual is also suitable for:

700 d

Table of Contents