Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Electrolux ESL 2435
Summary of Contents for Electrolux ESL 2435
-
Page 2: Table Of Contents
Contents For the user For the installer Safety information Technical specifications Description of the appliance Unpacking - Spray arm - Damages - Coarse strainer/microfilter - Use - Fine filter Installation 17-22 - Detergent dispenser - Position - Rinse aid dispenser - Measurements for fitting a wooden door - Water softener - Preparing the outer door... -
Page 3: Safety Information
Safety information Before installing and first using the dishwasher, read this instruction booklet carefully, including its hints and warnings. To avoid unnecessary mistakes and accidents, it is important to ensure that all people using the dishwasher are thoroughly familiar with its operation and safety features. Save these instructions and make sure they remain with the dishwasher if it is moved or sold, so that everyone using it through its life can be properly informed on appliance use and safety. -
Page 4: Description Of The Appliance
Description of the appliance - 4 -... -
Page 5: Spray Arm
Description of the appliance Spray arm (1) Do not fill the rinse aid dispenser with liquid detergent. It is important to keep all the holes in the spray arm clear. A clogged hole can seriously affect washing efficiency. Electrolux recommends the use of Finish dish- If the spray arm needs cleaning, unscrew the nut anti- washer detergent and Rinse Aid. -
Page 6: The Control Panel
The control panel Control- Indicator lamps lamps delayed start Buzzer Water softener Delay start On/Off button button button button Programme Combination buttons ”A” buttons In addition to selecting a programme, you can by pressing these two buttons adjust the setting of the water softener, switch off the buzzer and cancel a programme in progress. -
Page 7: Adjusting The Water Softener
Adjusting the water softener To prevent limescaling on the dishes and to the interior of the Contact your local Water Authority to find the dishwasher, the dishes must be washed with soft water. exact water hardness level for your area. This dishwasher is equipped with a water softener, where tap- The water softener has 5 settings: water which is harder than 4 °d (german degree) is softened. -
Page 8: Programme Chart
Programme chart All types of Coffee cups, Type of Plates and dishes delicate items dishes cooking pots • heavily Type of soil: • normally • normally • lightly • lightly soiled soiled soiled soiled soiled • dried-on food • dried-on food remnants remnants especially egg-... -
Page 9: Loading And Unloading
Loading and unloading the dishwasher How to load the dishes Baskets The illustration shows the dishwasher loaded with six Main basket place settings. Your own dishes are not likely to be Cutlery basket identical to this load, but if you follow the advice below The cup shelves can be placed in two different we are sure you will be pleased with the results. -
Page 10: Using The Appliance
Using the appliance Starting the programme Pause function 1. Scrape or rinse off solid food remnants. With the pause function the programme can be temporarily interrupted for a short period of time. 2. Load the dishwasher. (See the basket and loading). 1. -
Page 11: Maintenance And Cleaning
Maintenance and cleaning Cleaning the filters Moving the dishwasher There are two filters, a coarse one and a fine one which If you have to move the dishwasher (you are moving should be cleaned after every wash. Lift out these filters house, etc): which are in the base of the dishwasher and wash under 1. -
Page 12: Something Not Working
Something Not Working Before calling out an engineer, please check through the details below because some faults can be rectified easily without the need to call out an engineer. If an engineer is called to resolve a problem listed below or to repair a fault caused by incorrect installation or mis-use a charge will be made, even if the appliance is under guarantee. -
Page 13: Service
Service Service and Spare Parts Customer Care Department In the event of your appliance requiring service, or if you For general enquiries concerning your Electrolux appliance wish to purchase spare parts, please contact your local or for further information on Electrolux products, please Service Force Centre by telephoning: contact our Customer Care Department by letter or telephone at the address below or visit our website at... -
Page 14: Guarantee Conditions
Guarantee Conditions Standard guarantee conditions We, Electrolux, undertake that if within 12 months from the date of the purchase this ELECTROLUX appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, we will, at our option repair or replace the same FREE OF CHARGE for labour, materials or carriage on condition that: •... -
Page 15: Technical Specifications
Installation instructions Any electrical work required to install this appliance, should be carried out by a qualified electrician or competent person. Any plumbing work required to install this appliance, should be carried out by a qualified plumber or competent person. Technical specifications Capacity: 6 place settings accordance EN 50242... -
Page 16: Unpacking
Unpacking Damages If the dishwasher has been damaged during transport, you should immediately notify the company responsible for delivering it. If you discover any damage, faults or that anything is missing, you should notify your retailer immediately. Never leave packaging material in a place where children may play with it. -
Page 17: Installation
Installation Position The machine is basically designed to be built into a cup- board. It is vital to ensure that the machine is positioned on a horizontal level in order for it to function properly and so that the door can be properly closed. Make sure that the shelf for the dishwasher is properly secured inside the cupboard. -
Page 18: Preparing The Outer Door
Installation Preparing the outer door Screw the guide rods and hinges on the door into place using the predrilled holes. Mount plate Before installing the dishwasher and adjusting the door onto the cupboard, put the mount plate into its correct position on the shelf. -
Page 19: Fitting The Outer Door
Installation Fitting the outer door 1. Unscrew the screws on the mounting plate. Lift the plate off together with the door. 2. Lay the machine down on its back. Check that none of the hoses are trapped. Insert the guide rods into the plastic door guides. -
Page 20: Installing The Dishwasher
Installation Installing the dishwasher 1. Put the dishwasher into the cupboard and screw the mounting plate into position from underneath with 2 screws, with the washers between. 2. Put the spacers provided at the sides of the machine and screw the machine into place in the cupboard. -
Page 21: Water Inlet
Installation Water inlet The dishwasher is equipped with safety features which are to prevent the water from going back to the fresh water system. These features are ac- cording to current water technical safety regulations. The dishwasher should be permanently plumbed into a separate cold water supply. -
Page 22: Power Supply
Installation Power supply The dishwasher is supplied with a lead and electrical plug for connection to a 230 V, 13 A earthed wall socket. Before any work is carried out on the dishwasher, it must be isolated from the electric mains supply, for example by removing the plug from the wall socket. -
Page 23: Information For Test Centres
Information for test centres The salt container and rinse aid dispenser shall be filled in accordance with this instruction manual. Before conducting the measurements the dishwasher shall be operated for one or two complete cycles using detergent and a clean load. Test standard: EN 50242 and EN 60704 Rated capacity:...