User Manual; Basic Features - GE WattStation Wall Mount User Manual

WattStation Wall Mount User Manual
Step 5: Remove the wire pigtail from the line side of field wiring block and discard.
Step 6: Feed the supply power and ground wires through WattStation enclosure
holes. Slide WattStation onto the mounting bracket, ensuring that the opening in
the back plate bracket aligns with the tab on the wall mount bracket.
Step 7: Connect supply power wires to line side of fuse block and ground wire to the
ground bar.
Step 8: Replace the deadfront shield, the front cover with the provided hardware
and the oval snap-fit ring.

3. User Manual

3.1 Basic Features

Charging cord and connector provide link to electric vehicle

LED ring provides illumination around connector

Green indicator light displays when WattStation is in charge mode

Red indicator light displays when WattStation is in fault mode

 On/Off button allows total power shutdown
Tamper-proof / theft-proof key lock secures WattStation to the wall bracket

 Padlock option on connector provides additional physical security
 Availability of plug-in or hardwired version provides installation flexibility
 Entry options for supply power cable include top, bottom and rear and provide
additional flexibility for the hardwired version
9 GE Energy ©2011 GE Company All Right Reserved