Clean Cycle - GE Stainless Steel Professional 30 Range Use And Care Manual

How to set
The clean cycle takes about 5 hours plus about
30 minutes to cool down.
the oven for
self-cleaning
1 Push in the CLEAN selector button.
2 Set the thermostat dial to CLEAN.
• Cooling blower turns on.
• The OVEN ON light and HEATING light
• The DOOR LOCKED light turns on.
3 When cleaning has finished, push the OFF
The blower and the OVEN ON light will turn
off once the cycle has finished.
The door latch will open automatically after the
oven temperature falls below 550°F.
After a
If white spots remain, remove them with warm
sudsy water and rinse thoroughly with a vinegar

clean cycle

and water mixture. These deposits are usually a
salt residue that cannot be removed by the
clean cycle.
20
turn on.
selector button.
Self-Cleaning Oven
Stainless Steel Range
Thermostat dial
If the oven is not clean after one clean cycle,
repeat the cycle.
You may notice some white ash in the oven.
Wipe it up with a damp cloth after the oven
cools.