Siren - GE Allegro User Manual

Condition
DTIM trouble
DTIM phone low battery
Sensor previously in alarm
(alarm memory)

Siren

The siren is capable of low and high sounds. Low-level sounds are for nonalarm
cases such as key presses and trouble beeps. High-level sounds are used for alarm
situations.
Table 13: Siren volume level and pattern
Action
Entry delay
Exit delay
Protest beep
Trouble beep
Keypress
Police alarm
Emergency alarm
Fire alarm
32
Visual display
Press Status, Service Required +
<sensor name>
Press Status, Low Battery Phone
Module
Press Status, Alarm Memory +
<sensor name>
Note: If an alarm occurs, it is displayed until the panel is disarmed
and remains in the system status until checked.
Volume level
Programmed level
Programmed level
Programmed level
Programmed level
Low
High
Programmed level
High
Audible response
Four short beeps every minute
Four short beeps every minute
None
Pattern
One beep every 4 seconds, one
beep every second for last 10
seconds
If alarmed: Three beeps every 10
seconds, three beeps every
seconds for last 10 seconds
One beep every 4 seconds, one
beep every second for last 10
seconds
Long beep followed by short
beep
Four beeps per minute
One beep
Constant
On/off pattern
Temporal three: .5 s on, .5 s off, .5
s on, .5 s off, .5 s on, 1.5 s off
Allegro Control Panel User Manual