Registering Remote Control Codes For External Device Operations - Yamaha RX-V471 Owner's Manual

■
CODE SET
CODE SET
When the remote control codes for the TV are registered, the TV can
SOURCE RECE VER
SOURCE/
be operated at any time using the TV control keys, regardless of the
RECEIVER
1 2 3 4
selected input source.
Input selection keys
[ A ] V AUX
HDMI 1-4
AV
1 2 3 4
V-AUX
AV 1-6
5 6 AUDIO DOCK
AUDIO TV operation
TUNER
USB
DOCK
keys
TUNER
FM FM AM AM
PRESET PRESET TUNING TUNING
USB
NFO NFO MEMORY MEMORY
[A]
SUR DECODE SUR DECODE STRAIGHT STRAIGHT
MOVIE MOVIE MUSIC MUSIC
ENHANCER ENHANCER
SLEEP SLEEP D RECT D RECT
SCENE
BD SCENE
TV CD RAD O
DVD
• When a TV remote control code is registered to an input selection key, the TV can
OPTION OPTION
be operated using the TV operation keys only when the input source with the TV
code registered is selected.
VOLUME VOLUME
DISP A DISP A A A
Registering remote control codes for
POP UP POP UP
MUTE MUTE
MENU MENU
external device operations
MODE MODE
Register remote control codes for external devices (such as a BD/
1 2 3 4
DVD player) to control them with the unit's remote control. Because
Numeric keys
5 6 7 8
the remote control codes are registered to each input selection key,
9 0 10 10 ENT ENT
when you select an input source the remote control instantly
TV
INPUT
TV operation keys
switches to control that input source.
TV VOL TV CH
MUTE
INPUT
MUTE
TV VOL
TV CH
• The CD player (Yamaha: 5095) to AV3 as factory default settings. No remote
TV
control keys are assigned to other input selection keys.
1
2
Operating the TV with the remote control
INPUT Switches video inputs to the TV.
MUTE Mutes TV volume temporarily.
Controls the volume of the TV.
TV VOL
TV CH Switches TV channels.
TV Turns the TV on and off.
Use "Remote Control Code Search" in the CD-ROM
to search the available remote control codes for the
category, manufacturer, or external device.
Press CODE SET using a pointed object such as the
tip of a ballpoint pen.
SOURCE/RECEIVER blinks twice.
Perform each of the following steps within 1 minute. Settings
will be automatically stopped if more than 1 minute passes
after the last operation. To reset, repeat from step 2.
3
Press an input selection key.
(Example) When the remote control codes for the BD/DVD
player connected to HDMI1 jack are assigned, press HDMI1.
• Use [A] for external device operations only. Set this keys to remote control
codes if you want to perform external device operations without linking to
input source selection of this unit. For example, it may be convenient to
assign remote control codes for devices such as TVs.
4
Enter a remote control code (4-digit) using the
numeric keys.
Once the remote control code is registered successfully
SOURCE/RECEIVER will blink twice.
If the registration fails, SOURCE/RECEIVER blinks six times. If
the registration fails, repeat from step 2.
• For details on how to register the input selection key applied the remote
control code on a corresponding SCENE key, refer to "Changing the settings
for the SCENE function" (p.32).
75
En