Overview; Configuration; Figure 2-2 Ble*/* Configurator - Motorola BLE Series Installation And Operation Manual

2-2

Overview

Configuration

The BLE*/* is fully configured in the Motorola factory per customer request. It is recommended
that you verify the configuration listed on the outside of the shipping carton with the
configuration you ordered. The shipped configuration is also noted on labels located on the side
of the housing and the side of the electronics module.
Figure 2-2
BLE*/* configurator
Key Frequency Range
87E 5-30 MHz, 47-870 MHz
87S 5-40 MHz, 52-870 MHz
87K 5-42 MHz, 54-870 MHz
87J 5-55 MHz, 70-870 MHz
87A 5-65 MHz, 85-870 MHz
Key
G
E-GaAs (High Output w/28 dB Gain)
H High Gain E-GaAs (High Output w/32 dB Gain)
/
BLE
Key Level Control
X None
T TDU
A ADU-499.25/S
B ADU-439.25/S
C ADU-403.25/S
D ADU-445.25/S
E ADU-549.00/S
Q QADU-609.00/S
Key Station Slope
X 8 [Fmin-870 MHz]
H 12 [Fmin-870 MHz]
Key Return Amp w/JXP-ZXs
X No Return
L Low Gain Hybrid
H High Gain Hybrid
Key Reserved
X Reserved
BLE*/* Installation and Operation Manual
Key Housing Size
X Standard
D Deep lid for status monitor
N None (Electronics only)
Hybrid Technology
- -
Key
X Standard
C Chromate
S Chromate w/ SS plugs
P Epoxy
Key
E
Key
X
- - -
Key AC Current Capability
X Standard (15 Amp)
Low Current (10 Amp)-
available for electronics
L
package only
Key Voltage Surge Protector
X Surge Arrestor
C FTEC; Crowbar
Key Overcurrent Protection
X 20A Auto Fuse
S Shunt
Key Reserved
X Reserved
Key Ingress Switching
B Ingress Control Switch
X None
Housing Finish
Ergonomics
Ergonomics
Reserved
Reserved
-