Caution - Epson SF-710 User Manual

SF-710/510/310 User's Guide

Caution:

❏ After using the device, use a little clean water to wash the contact points, wipe away most of the water with a towel
and so on, and then let it dry naturally. If the device is placed in the cradle when it is dirty, it could corrode,
malfunction, or cause a communication failure.
❏ If charging or communicating becomes unstable, clean the contact points on the device and the cradle with a
damp cotton swab, and so on.
❏ If device operations become unstable or if functions do not operate correctly, perform a system reset (hold down
all four buttons at the same time).
❏ If the HR monitor operations become unstable or if it does not function correctly, remove the HR monitor battery,
place it in the battery compartment so that the negative side is facing up. Wait for three seconds (reset), and then
put it back in the correct direction.
Troubleshooting
114