Table of Contents
Advertisement
Main Menu
o
Select ON, to display the amount of time remaining before the hard disk runs out of record
space. The data is displayed near the upper left hand corner of the primary monitor. The unit
displays the Record Capacity with two measures of time, and switches automatically
depending on the amount of time remaining:
Days and Hours
Hours and Minutes
Minutes and Seconds
Use the Arrow buttons to select ON or OFF.
Press the Enter button to confirm the selection and exit the menu.
Press the Menu button to exit the menu without making changes.
Main Menu
o
To display the time and date of the last alarm, near the upper right hand corner of the primary
monitor, select On. The unit will display NONE if there is no previous record of an alarm.
Use the Arrow buttons to select On or Off.
Press the Enter button to confirm the selection and exit the menu.
Press the Menu button to exit the menu without making changes.
Main Menu
o
To display the Record or Playback Speed, near the lower right hand corner of the primary
monitor, select On. The unit will display NONE if there is no previous record of an alarm.
Use the Arrow buttons to select On or Off.
Press the Enter button to confirm the selection and exit the menu.
Press the Menu button to exit the menu without making changes.
Main Menu
o
To display the time and date the recording was made (during playback) select On. The data is
displayed near the upper right hand corner of the screen.
Use the Arrow buttons to select On or Off.
Press the Enter button to confirm the selection and exit the menu.
Press the Menu button to exit the menu without making changes.
0150-0255C
Display Settings
--OR—
Display Settings
--OR—
Display Settings
--OR—
Display Settings
--OR—
4-7
Record Capacity
Last Alarm
Record Playback Speed
Playback Time / Date
OFF
ON
OFF
ON
OFF
ON
OFF
ON
Kalatel VDR
Advertisement
Table of Contents
