Scan Priority (Ads-1100W Only) - Brother ADS-1100W User Manual

Troubleshooting
NOTE
You can also reset the Network settings by doing the following.
1 Open the Top Cover (1) and the Front Cover (2).
2 Press for about five seconds until the machine beeps.
(ADS-1600W)
a
Press (Settings).
b
Press a or b to display Initial Setup.
c
Press Initial Setup and then Reset.
d
Press the type of reset you want to use.
e
Press Yes to confirm.
f
Press Yes for 2 seconds to restart the machine.

Scan Priority (ADS-1100W only)

You can configure the default Scan-to key on the Control Panel of the machine. When scanning is finished,
the key will blink if it is available.
a
Start the ControlCenter application.
®
Windows

1
Click the (ControlCenter4) icon in the task tray and then select Open from the menu.
The ControlCenter4 window will appear.
1
2
7
7
208