Change Other Users' Passcodes - Bosch Security Systems User Manual

Change Other Users' Passcodes

I have this feature.
I do not have this feature.
This feature allows those with Owner type passcodes to change the
passcodes of system users.
1. Make sure the system is turned off (On light is off).
2. Press the [6] key and enter your passcode (Owner type required).
The display scrolls the following:
3. Press [0] to change passcodes. The display shows:
4. Enter the number of the user whose passcode you want to change
(1 to 8). The display shows:
5. Enter a new passcode with the same number of digits.
6. The OK tone sounds (if the error tone sounds, try a different
passcode). The system asks you to enter the new passcode again:
7. If the change was successful, the following display is shown. If the
error tone sounds, return to step 3. Be sure to enter the same
passcode in steps 5 and 6.
30
PUSH 9 TO RENEW
ALL ONE-TIME
PUSH 1 TO CHANGE
CODE TYPES
PUSH 0 TO CHANGE
CODES
PUSH CLEAR
TO EXIT
SELECT CODE
(1 TO 8)
ENTER NEW CODE
ENTER NEW AGAIN
CODE CHANGED