Others - Pioneer LX01BD Operating Instructions Manual

Others

Problem Check
The power turns off Is Auto Power Off set to On?
automatically.
Is HDMI Control set to On?
The power turns on Is HDMI Control set to On?
automatically.
Inputs of connected TV and Is HDMI Control set to On?
this receiver subwoofer,
switches automatically.
Player cannot be operated Are you operating the remote control from a point too far away
with remote control. from the display unit?
Are the batteries dead?
Settings you have made have • Have you disconnected the power cord while the player's
been cleared. power was on?
• Has there been a power failure?
After a disc is inserted, Are there too many files recorded on the disc?
Loading stays displayed and
playback does not start.
 is displayed in file names,
etc.
Is Hybrid Disc Playback properly set?
The DVD layer of BD and DVD
hybrid discs cannot be
played.
The CD layer of BD and CD Is Hybrid Disc Playback properly set?
hybrid discs cannot be
played.
The Hybrid Disc Playback Is a disc set in the disc tray?
setting cannot be changed
(displayed in gray).
BDMV/BDAV Playback Is a disc set in the disc tray?
Priority setting cannot be
changed (displayed in gray).
Remedy
If Auto Power Off is set to On, the power turns off
automatically if no operation is performed for over 30 minutes
(page 84).
The player's power may turn off together with the power of the
connected TV. If you do not want the player's power to turn off
when the TV's power is turned off, set HDMI Control to Off
(page 83).
The player's power may turn on together with the power of the
connected TV. If you do not want the player's power to turn on
when the TV's power is turned on, set HDMI Control to Off
(page 83).
The inputs of the connected TV or this receiver subwoofer may
automatically switch to the player when playback starts on the
player or the menu screen (Home Media Gallery, etc.) is
displayed. If you do not want the inputs of the connected TV
and/or this receiver subwoofer to switch automatically, set
HDMI Control to Off (page 83).
Operate from within 7 m of the display unit's remote control
sensor.
Replace the batteries (page 25).
If the power cord is disconnected or there is a power failure
while the player's power is on, the settings you have made may
be cleared. Always press  STANDBY/ON on the player's
front panel or  STANDBY/ON on the remote control and
check that POWER OFF has turned off from the player's front
panel display before disconnecting the power cord. Be
particularly careful when the power cord is connected to the
AC outlet on another device because the player turns off in
conjunction with the device. We recommend plugging the
power cord into a wall outlet whenever possible.
When a disc on which files are recorded is inserted, depending
on the number of files recorded on the disc, loading may take
several dozen minutes.
The characters that cannot be displayed on this player are
displayed in .
Set Hybrid Disc Playback to DVD (page 84).
Set Hybrid Disc Playback to CD (page 84).
The Hybrid Disc Playback setting cannot be changed when a
disc is set. Remove the disc, then change the setting.
The BDMV/BDAV Playback Priority setting cannot be
changed when a disc is set. Remove the disc, then change the
setting.
07
99
En