Sound System; Labelling Channels; Skipping Channels - Sharp PZ-MR2X Operation Manual

Basic adjustment settings
Sound menu
Programme Setup "Manual"
10 20 30
01 SAT.1 11 21 31
02 PRO7 12 22 32
03 KABEL 13 23 33
04 14 24 34
05 15 25 35
06 16 26 36
07 17 27 37
08 18 28 38
09 19 29 39
Labelling menu
Programme Setup "Manual"
10 20 30
01 SAT.1 11 21 31
02 PRO7 12 22 32
03 KABEL 13 23 33
04 14 24 34
05 15 25 35
06 16 26 36
07 17 27 37
08 18 28 38
09 19 29 39
Skip menu
Programme Setup "Manual"
10 20 30
01 SAT.1 11 21 31
02 PRO7 12 22 32
03 KABEL 13 23 33
04 14 24 34
05 15 25 35
06 16 26 36
07 17 27 37
08 18 28 38
09 19 29 39
40 Sound sys.
41 B/G
42 D/K
43 I
44 M
45
46
47
48
49
[NEXT]
40 Label
41 SAT.1
42 A B C D E F G CLEAR
43
H I J K L M N
44 O P Q R S T U
45 V W X Y Z 0 1 NEXT
46 2 3 4 5 6 7 8 BACK
47 9 + – . END
48
49
[NEXT]
40 Skip
41 Off
42
On
43
44
45
46
47
48
49
[NEXT]

Sound system

On Programme Setup "Manual" menu
1
Press a/b/c/d to select the channel you want to
edit, and then press ENTER.
• The selected channel information displays.
2
Press a/b to select "Sound sys.", and then press
ENTER.
• Receivable sound systems (Broadcasting systems) are
listed.
3
Press a/b to select your sound system, and then
press ENTER.
A
• If you adjust this setting, please check the colour system
information on page 33.
• Return to the previous menu by pressing RETURN.
• Exit the menu by pressing MENU.

Labelling channels

Auto installation automatically assigns names to all
viewable networks. However, you can change
individual channel names.
On Programme Setup "Manual" menu
1
Press a/b/c/d to select the channel you want to
edit, and then press ENTER.
• The selected channel information displays.
2
Press a/b to select "Label", and then press
ENTER.
• Alphabet and numbers are listed.
3
Press a/b/c/d to select each character of the
new name for the channel, and then press ENTER.
4
Repeat the above until the name is fully spelt out.
• The name can be 5 characters or less.
A
• Return to the previous menu by pressing RETURN.
• Exit the menu by pressing MENU.

Skipping channels

Channels with "Skip" set to "On" with CHa/CHb are
passed over even if you select them.
On Programme Setup "Manual" menu
1
Press a/b/c/d to select the channel you want to
edit, and then press ENTER.
• The selected channel information displays.
2
Press a/b to select "Skip", and then press ENTER.
• Skip menu displays.
3
Press a/b to set "Skip" to "On", and then press
ENTER.
A
• Return to the previous menu by pressing RETURN.
• Exit the menu by pressing MENU.
E-34